How to use a selfie stick monopod to take picture

Monopod selfie is mainly composed by a self stick, a mounting bracket, a Bluetooth remote self-timer button, the mounting bracket can fix cell phones, cameras, and even tablet PCs, freely adjustable telescopic rod contribute to a wider shooting angle, which can be controlled through the bluetooth button at bottom of the monopod  selfie .
Monopod  selfie is a fashion selfie electric product, it can be arbitrarily stretched between 20 cm to 120 cm, just fixing the mobile phone on the stick，we can enjoy the multi-angle self-timer remote controlled.

The phone with 56mm ~ 86mm width can be placed on the monopod selfie , without having to download when using the APP, open the bluetooth pairing, the bottom of the selfie stick with mirco USB port, charged about half an hour to one hour may , the longest standby time is up to 4 days.

Some of the monopod selfie is compatible with iOS and Android operating system, others can only use one operating system. What to control camera decides how the operating experience: Some Selfie monopod need the phone side and the self-rod ends connected to Bluetooth, using the "Shutter Remote Control" to operate. Although you can not press the camera or the shutter button on the phone, but need to press the remote control button. Some monopod selfies' control buttons is on the handle pole so that you can press button to take pictures without the additional use of the remote control with  the help of Bluetooth phone system automatically identifies,.

In addition, the "camera response speed" indicators are also very critical. No one would like to be still waiting for shot for a long time.

It is worth mentioning that few selfie monopod is able to adjust the focal length of the phone, but most of them can not adjust the focus, and those can adjust the focus of the operation are likely to available to few brand.
Step four: Turn on self stick. Press the power button for 2 seconds, make sure the green LED lights up for one second and then turns off,.

Step five: matching Bluetooth. Press the camera button for 2 seconds until the green LED lights is flashing for the self-shot pairing mode. Then open the Bluetooth, do not click the Bluetooth device for the pairing unless you searched nearby Bluetooth devices selfie signal. Wait for eight seconds, the green LED lights lit, the pairing is successful.

Step six how to manually adjust the telescopic rod length depends on where you are and how many you would like to take in the pictures,just click the camera button.

Step seven: timely shutdown in case of electrical run out. Press the power button for 3 seconds, the green LED light flashes rapidly for 2 times, the shutdown is complete.

Step 8: it can be charged by using USB cable connected to computer or power strip. Make sure the red LED lights lit constantly when charged, two hours is usually enough.

Precautions

It should be noted that most of selfie stick with sleep function will automatically enter the sleep state without using it for 5 minutes. Just press the camera button to wake up and automatically connect the phone. When the phone Bluetooth is disconnected with selfie stick's Bluetooth, press the camera button to automatically connect.

Since Android is an open source system, individual phone camera software do not support the selfie stick, you can manually download a photo Monopod software.

Bluetooth remote monopod